2020-08-14

DEJAVU DJV Neon TC Box Mod Kit

By vapesmoant

DJV Neon – SAC Introduction

DJV brand is the brain child of Malaysia and YouTuber vaporizer drill Adrian Lo Dejavu. A product becomes Vaper try to offer what you want vapers and often offers a little something more than usual. Neon mod is a single mode device 18,650 with 80W power, TC, and voltage curves. chassis is the thickness of the ABS provides a good balance between being strong, good hand feeling while being lightweight. mod paired with neon tank, which also supports the coil Smok Cloud beast, but also offers a selection of an accumulation of single CAB RBA. A convenient way (for many uses, it) brings the mailbox, which will see neon kit DJV!

Package

  • Stickers
  • 1 x RBA
  • 1 x USB Cable
  • 1 x Lanyard Tag
  • 1 x User Manual
  • 1 x Fused Clapton
  • 1 x Warranty Card
  • 1 x DEJAVU Neon MOD
  • 1 x Extra Glass Tube 2.5ml
  • Spare o-rings, grub screws etc
  • 1 x DEJAVU Neon Tank (4.5ml) 0.3ohm Coil

Aesthetics and Ergonomics

The kit comes in cartons and opening for receiving a closure zipper carry bag handy with all the perfectly packaged inside. Some pictures on the Internet show the device as colorful and these images are the device with extra stickers you receive, but the device it’self is available in black or white, I’m white version.

The build quality device in plastic and high is not something you feel generally well together, but DJV stuck here with ABS thick, I maintain control of the Internet to find finally it is actually a kind of metal because it feels so solid and high quality. Both sides DJV logo bleeding in the ABS and the top, where it meets the spine have a small opening for receiving a cord if that’s your thing.

The front of the apparatus includes a display panel which includes central stained black, above the screen is a square and lower button on ignition of less than 2 square navigation buttons are sitting next to each other, the bottom is the micro USB port. On the basis that we have information on the manufacture and the plate of the old school of the battery, then over a small plate 510 which is flush with gold plated spring 510.

The device is very light and portable enough to fit on the outside of the house is a box shape, but all finishing curves and smaller than the battery of the dual camera, it is necessary to emphasize that is larger than most individual devices the battery!

Specifications and Features DEJAVU tank Neon

  • Size: 28 x 45mm
  • Top-fill
  • Thread: 510
  • Colour: Black
  • Bottom Airflow
  • Capacity: 4.5ml/2.5ml
  • Coil: Mesh 0.3ohm Coil
  • RBA Coil: Single Coil
  • TFV8 V8 Coil Compatible

Neon Tank Overview

Neon tank takes a little more than just being set in the table, because it is very well made a deposit I enjoyed the test and frosting-to-cake RBA.

This tank is fairly short and with a 28mm to 24mm glass bubble widest point at the base of the creatures. DJV mesh coil 4.5ml capacity and 2.5 ml glass bubble glass directly but with great space RBA coil I want to estimate and 4 ml of 2 ml using RBA.

It has an upper reservoir filled with a core wire so that only releases perimeter crises air hose on both the top plate of the filler cap and the thickness of the sealing ring for excellent sealing . He unscrewed and media after taking screws from your backup after filling takes place on the bayonet the most popular method, but as with all the disadvantages with this complete kit and find. filler plate having a closed perimeter, and three kidney fill port for filling in the form of all nozzle types is a trouble free experience. adjusting the smoke drop by drop 810 Advanced Goon is pretty good, but can be adapted to your own if desired.

ring Cyclops control the air flow sorting provide more air to the bottom of the coil. Kanthal coils suppose including specification is not given and a 0.3ohm network nominal coil between 20W and 40W. Another advantage is the V8 coil TFV8 (Animals Cloud) also supports does not provide more options.

Included RBA And Build

ARL can be hit or miss but one included here is incredible and I consider it more of a conversion RTA. Part of the bridge is screwed to the base, which now provides a floating bridge. On the one hand, we have 2 top position with a generously sized terminal, your prospect is defined by the upper screw at the top of the post. If there is a message that we have an arc-shaped wall airflow lower two rows of honeycomb air flow, we also have an outlet air flow directly under the coil will sit.

Since the walls of the air is lower than the position of the conductors can be placed through the pole hole easily without first cut and then simply slide the spool on the walls of the air flow so that it can fall into place. Then just bind and cut your prospects and use a rolling pin or fit for purpose tools for the coil position is exactly the position you want, compare it with other ARL them plenty of space and the construction Checklist at all, in fact I find it easy!

coil eating again, I can only assume that there Kanthal specifications provided, but no liquid 3.0ID with Clapton, but a larger coil will fit without a problem, I go to the building 0.29ohm. Simple wicking into the floating platform, just cut off the tip of your cotton long enough to grow into a channel without letting them hit the bottom of the tank. When the arms are screwed into the bridge then also screw in the air pipe when the tank is reduced chaotic space is formed, enough to fill the tank right now and you’re ready to rock!

Neon Mod Specifications and Features:

  • Size: 45 x 26 x 83mm
  • Thread: 510
  • Output Power: 5-80W
  • MOD Material: ABS
  • Battery: 1 x 18650(excluded)
  • Resistance Range: 0.1ohm-3.0ohm
  • TC Modes Supports: SS316/Ni200/Ti
  • Display: 0.96 IPS colour screen
  • Temperature Range: 200℉-600℉/ 100℃-300℃
  • Charging Parameters: DC 5V/2A
  • Input Voltage: 3.2-4.2V
  • Output Voltage: 1-8.0V
  • Working Mode: Power, Temp, Curve, Voltage
  • Colour: White,Black

Pas Battery

This device can accommodate 18,650 to install by opening the old school style of battery plates underneath the unit. The dishes have a central bar that can be used to easily open the lid and thread nice and smooth. directions marked on the bottom plate in silver black so it looks clear and I personally still like the battery mounting style because there is no risk of damaging the package, good work!

Monitor

This screen has a color cover, but bright and sharp display and good brightness and color can be changed in the menu. Top Central we have the power, voltage or temperature following modes depending on your mode.

Then we Resilience forth, except in voltage mode and displays the power instead. No pre-heat power and we have a progress bar color vape time and finished at the bottom of the long bar battery status.

Operate Neon Lights

In some of the photos on the website if Sacowin shows a device with Puff fight, but I use the device on and off for 3 weeks and could not find the breath meter or a way to activate the one hand, there is also mention of the manual I guess he was originally going to have but there was a change of plans.

This device is the usual 5 Click fire button to turn on and off 5 clicks and once on the + and – lock all the buttons of navigation, but the device will still fire.

3 press the fire button opens the menu all on one screen where you can scroll through the items and select fire. Must first 4 modes Wattage, TC, and the stress curve and then we follow the brightness bar the color palette to choose a color on-screen information between green, yellow, red, blue or white, the output is at the bottom that will take you back to the screen work.

In power mode by pressing the + and fire and light that flickers changed between normal, mild or high. Voltage mode is simply a case of changing the voltage in CV mode by pressing the + and fire together, wire TC lets you choose to use. Increasingly TC mode by pressing – and together, fire allows you to change the temperature unit and the power to regulate your power to control the temperature. When using curves + and fire lets you choose between M1, M2 and M3 – and the fire brought 5 second curve for you to just settle with the navigation buttons to set up and fire to choose.

That is all! many clothing options available and some customization while maintaining a relatively simple operation of the device!

Evaluation

Whatever the device has no USB cable type C has no high intake of fast connection socket bayonet fills up very quickly and it becomes big enough for 18650 single device, they are really not much to find fault with me and certainly not think there is a strike deal breakers. I think less will be a firmware update can add a counter breath if the breath against important to you, but all I know.

the device is a real consistent player, I have not tested the TC because I do not have the equipment to provide detailed information, but the power, voltage and curve mode everything worked fine, direct fire with the way soon, I’m just impressed everyone!

The neon tank does not let the device down, smoother air flow if this is what you like, but closes to all the restrictions you want, but it remains smooth throughout. The bobbin thread provided 0.3ohm I found it best to only a third of the air flow in 30W and 30W clouds just beautiful and there is no taste of trade as it is above average. Compatibility with animals reel clouds also offer more options that can not be a bad thing.

As mentioned RBA as good as the neon turns with a coil floating bridge FSA, build and wicking is a breeze and melted including Clapton on 0.29ohm I find that I have to throw 25W taste Cloud Banger! very impressed.

Because the oblique 24mm edge Atty will not look perfect and 26mm will just look bad, it is not suitable for large Atty, but it is a 80W device again not really a problem. Although I personally recommend never charge your device unless you just choose 2A load support and firmware.