The Smok Nord X Set 60W is the advancement of the Smok Nord 4 Kit from 80W.
The Smok Nord X Set 60W is the advancement of the Smok Nord 4 Kit from 40W.
Its shade variety and also layout comply with the design of the previous generation. It continues to be a small device, the total dimensions are not really different from those of the Nord 2.
It integrates a 1500mAh battery, with the very same ability as the Nord4 Package, but the power has boosted from 40W to 60W. Contrasted to the previous single button layout, up/ down modification switches have been added.
To view one of the most relevant vaping information, the mod is furnished with a 0.69 “OLED display.
The SMOK Nord X has a greater developed top quality, makes use of IP67 waterproof technology, can endure 15cm to 1-meter depth for thirty minutes, and performs dustproof (IP67) and shockproof functions.
Appreciate the reading.
The bundle shows the trademark name on the front and some highlights in the form of symbols.
To remember the IP67 features, the mod is shown partially immersed in water.
Below you can read the name and also the color of this gadget.
On the back are the materials, logos/brands, and cautions for appropriate use.
On the side, there are the addresses of the producer, a barcode, scratch/check, and hologram.
1 Nord X IP-67 tool
1 Nord X RPM 2 Sheathing of 6ml Coil RPM 2 Mesh 0.16 Ω pre-installed
1 x 6ml Nord X RPM Case Coil RPM Fit together 0.4 Ω pre-installed
1 USB wire
1 Guarantee card
1 Individual guidebook
Frame product: zinc alloy
Show: 0.69 “OLED.
Output power: 5W-60W.
Battery capability: 1500mAh.
Input voltage: 3.3V-4.2 V.
Output voltage: 0.5V-4.0 V.
Resistance Array Supported: 0.2ohm-3.0 ohm.
Billing voltage: 5V ± 0.2 V.
Charging present: 1.2 A (optimum).
Overload voltage: 4.3 V ± 0.05 V.
Over discharge voltage: 2.4 V ± 0.05 V.
Skin capacity: 6ml.
Black Cobra, White Cobra, 7 Color Cobra, 7 Color Spray, Liquid Blue, Fluid Purple, Liquid Red, Fluid Gold.
Smok Nord X Package 60W:.
Frank you, Sep 9, 2020 # 1.
Apr 26, 2019.
The zinc alloy framework is covered with soft and acrylic rubber superstructures, the texture of the panels recalls the skin of serpents.
On the first panel in question, we find the Fire button located at the top and the writing Smok at the bottom.
The rectangular fire button is backlit in white and also performs notification functions.
- when the battery is low, the LED flashes 15 times (Battery Low).
- during switching off/ on the led flashes 3 times GoodBye).
- if the resistance is lower than 0.3 Ω, the LED flashes 4 times (Ohms too Low).
- if the resistance is equal to or greater than 3.0 Ω the led flashes 4 times (Ohms to High).
- if the cartridge is not present on the battery, the LED flashes 4 times (No Atomizer).
- if the battery is short the led flashes 5 times (Atomizer Short).
- if the shot exceeds 8 seconds the LED flashes 5 times (Time Over).
The other panel shows (below) the name of the device, the battery capacity, the C E brand, the disposal logo.
Laterally, the soft rubber part has the task of protecting the device, it extends with a “U” shape from one airflow to the other, covering the bottom of the mod.
The Oled screen makes 0.69 “is immersed in this rubber protection.
It reports the wattage, the Ohms of the Coil, the Volts, the percentage of remaining battery charge, and the number of Puffs.
Below the screen are the Up and Down adjustment buttons, small and coils in shape.
- Five clicks on the Fire button to turn the device on/ off.
- Three clicks on the Fire key to lock/unlock the device.
- During the vape, the time of the last puff is shown on the display for a time of 0.5 s, before returning to the default setting.
- With the Mod unlocked you can adjust the wattage from 5 to 60W using the up/ down keys arranged under the screen.
- The number of puffs is automatically reset when it reaches the limit of 999.
- When the device is charging, the display shows the current charge status and the remaining time to complete the operation.
In the image below we can see the protective rubber part reaching almost the base of the airflow in height.
The airflows are sized for Flavor and measure 10x2mm.
The support base of the mod incorporates the Type-C charging socket hidden by an IP-67 cap, the cap is marked in the opening direction.
The compartment/ pod is held to the mod by four French screws, on the bottom, there are the contact pins, the floor that surrounds them seems to be designed to be waterproof.
The Nord X comes with two pods with a capacity of 6ml.
Depending on the Pod used, it is possible to accommodate RPM 2 coils or the classic RPM Coil.
Both the RPM2 and RPM Pods mirror the Pod compartment and thanks to the design and their precise conformation they fit perfectly with the Mod.
A practical “press and pull system” is provided for both Pods and for the insertion of the Coils. The RPM2 cartridge (right in the photo) has a specific insertion/coil hole, larger than that of the RPM cartridge.
Cleverly the drip-tip has a suitable diameter and differs between the RPM and RPM2 tank. This is to suck in the right amount of air based on the type of coil inserted.
Drip-Tip RPM2 ø7.5 mm.Drip-Tip RPM ø5.5 mm.
Both Pods thanks to the large transparent surface ensure great control over the liquid level inside them.
The refill is quite easy, the rubbers are marked in the opening direction and the hole below is of adequate size for most dispensers on the market.
Also, the new Nord X Kit uses the Coil RPM2 Meshed 0.16 Ω 25-50W with Best at 40W introduced with the Mod Scar P3.
The other Coil available in the Kit is a classic RPM Mesh 0.4 Ω Best 25W, no range indicated.
The 0.16 Ω RPM2 is a coil with really flexible use, aromatically valid, and incredibly able to work perfectly at only 25W/ 30W.
I must say that the first time I tried it on the Scar P3 I was surprised.
Respecting the Best of 40W that Smok indicates for this Coil, its behavior becomes optimal, the production of steam is very high, and dense clouds of steam are produced.
The steam is hot with smooth puffs like oil, it works well with both 50/50 and 70/30 liquids.
The Coil RPM Mesh 0.4 Ω 25W was introduced at the time of the RPM40. Also, this coil has a flexible use, at the indicated “best” of 25W, the efficiency is optimized, the steam production is satisfactory, the DTL puff is of the aromatic yield and the restricted type is discrete.
No particular problem with the production of condensation, just dry at the end of the day. Smok and its coils turn out to be among the best in this respect.
The built-in 1,500 mAh battery seemed to me to last quite a lot even using it at a constant 40W, moreover, it is quite quick to recharge, for a full charge cycle it takes about 75 minutes.
The safety equipment of the Nord X kit includes:
8s cut-off protection.
Short circuit protection.
Low battery warning.
Micro-USB Port Protection.
Although I am not particularly fond of Pods, I must admit that this new Nord X kit is comfortable and has potential if used in Flavor, it will certainly be appreciated also by those who, with the RBA base (sold separately), want to dedicate to regenerations, without giving up an excellent level of safety protections and a gigantic liquid capacity of its 6ml cartridges-tanks.
Highlight Smok Nord X Kit 60W:.
Two types of pods to use different types of Coil.
Pod with a high content of E-liquid (6ml).
Wide choice of Coil.
Estimated time remaining for a full charge.
If you were a fan of the SMOKtech’s Nord 2, just wait until you start vaping with the SMOK Nord X Pod System. For this highly anticipated pod-based kit, this legendary brand took all of the features that we love from Nord 2 and enhanced it with phenomenal technology and design elements.
The Nord X offers a compact, pocket-friendly design with a slim chassis and a tapered mouthpiece that aids in the comfort of its use. It has an IP67 grade, making it waterproof, dustproof, and shockproof, as well as resistant to corrosion.
Powered by a 1500mAh battery, which’s extremely robust for such a small device, there’s a small color display screen on the chassis, paired with navigation buttons. These allow you to easily adjust the wattage for better control over your every session. A firing button sits on the center of the chassis’ front, while an LED light indicator provides information regarding battery status. The devices charge quickly, too for minimal downtime, and comes complete with important safety provisions in place. Intelligent atomizer recognition stands out the most. This makes it easy to enjoy a vape that’s compatible with your coil and pod.
Included are two 6mL pods: RPM 2 Pod (RPM 2 Mesh Coil at 0.16 ohms), and RPM Pod (0.4 ohms RPM Mesh Coil). The coils are interchangeable and replaceable, and you can explore a wider range of configurations belonging to both series, along with a plug ‘n’ play coil installation. Explore both freebase and salt-based nicotine e liquids at any time.
Overall, the SMOK Nord X 60W Pod System is one of the most versatile, user-friendly, and luxuriously designed pod systems on the market, making it a must-have for fans of portable systems that bring forth generous power.
Features & Specs:.
SMOK Nord X Kit is a new member of the Nord series. Nord X built-in 1500mAh battery that can provide up to 60 watts of power, With the power range of 5W-60W, the Nord X will keep you vaping all day without worries.
The Nord X offers a compact, pocket-friendly design with a slim chassis and a tapered mouthpiece that aids in the comfort of its use. This makes it easy to enjoy a vape that’s compatible with your coil and pod.
Included are two 6mL pods: RPM 2 Pod (RPM 2 Mesh Coil at 0.16 ohms), and RPM Pod (0.4 ohms RPM Mesh Coil). The coils are replaceable and interchangeable, and you can explore a wider range of configurations belonging to both series, along with a plug ‘n’ play coil installation. Explore both freebase and salt-based nicotine e liquids at any time.
- U.S. Food and Drug Administration, Vaporizers, E-Cigarettes, and other Electronic Nicotine Delivery Systems (ENDS), Federal Agency of United States Department of Health and Human Services, Mar 13, 2019