smok vape nord RPM80 mag trinity alpha Nfix Kit review
I have a smok nord 2 cabins health for the purposes of this review.
SMOK Nfix Kit 25W three colors:
– chromium PRISM
– Gold Prisma
Smok g-nested 3 specification mod
– Size: 54 x 28 x 85 mm
– Chip: IQ-G chipset
– Operating mode: VW (Standard soft, hard, Max) / TC (NI, IT, SS, TCR, heat) / Mode I
– Power range: 1 W-230W (VW) / 10-230W (TC)
– Input voltage: 6.4V-8.4V
– Output voltage: 0.5V-8.2V
– Battery: two cells 18650
– Cooking time: 0.001s
– Loading ports: Type C
– Charging voltage: 5V
– Charging Current: 2.0A
– Standby current: <400uA
– Resistance Range: 0.1ohm-2.5ohm (VW) / 0.05ohm-2.0ohm (TC)
– temperature: 200 ° F-600 ° F / 100 ° C-315 ° C
– Display: 2.4 inch touchscreen
Smok tfv16 tanks Lite Specifications:
– Size: 24 x 58.5mm
– Capacity: 5 ml
– Filling: Top Refill System
– Material: Stainless Steel
– Coils: Mesh TFV16 conical coil Lite, best: 60-75W; TFV16 Lite mesh 0.15ohm double coil, better: 60-90W
– Subject: wire gold plating 510
TFV Smok lite 16 is 24 mm in diameter and 58.5mm high this atomizer. With the atomizer is in the package, you will receive two tanks bubbles and receive two coils.
atomizer quality construction is good, the wire is smooth and everything is as it should be. Previous you can see atomizer “Smok” and the bottom of the atomizer can see the “Designed by Smok”.
Using spray is RPM80 Pro and the spray nozzle standard pre-installed is not compatible with the advice 510 or 810 drops would be a disadvantage for some people. Leakage is acceptable to use in my opinion.
This is the load atomizer and atomizer can see the buttons to press to push the top cover. So when a button is pressed, you can push the envelope and see the fill hole. Fill a large gap and you will not have a problem to fill the tank. No leak when the tank is filled.
This tank sprayer is equipped with glass bubbles and bubbles package preinstalled, you will receive a glass tank replacement. Capacity glass tank with a capacity of 5 ml of great bubbles in my opinion. If desired, you can buy in the release of the atomizer 2 ml. I liked the glass bubble and I like the ability.
With the atomizer, you receive two coils. A coil is pre-installed and the other is in the box. Integrated coil tfv16 Lite mesh coil and coil works best 60-75w cone, the coil resistance is 0.2ohm. Receive coils in the package is a double mesh tfv16 Lite coil and has the best resistance and 60-90w 0.15ohm work. You really can easily replace the atomizer coil you need is out of the coil and a pulse in another, very simple and easy. In the coil, you can see the engraved lines so you can tell me when to fill the tank, which is nice. The first time the coil you need to start with a few drops of liquid E and can put a coil in the tank and fill the tank is used.
In the control dial airflow, you can see that the air flow both places. In the control dial airflow, you can see some details that help adjusting airflow and what part will be adjusted, will be the same on the other. You can easily adjust the airflow into the atomizer.
How does it work? Atomizer and my mind:
Atomizer build quiality I received was very good, everything worked fine and the correct cable. With the atomizer, you receive two rollers and two glass bubble tanks were really good in my opinion. Smok also receive a standard preinstalled drops and the spray nozzle is not compatible with the advice 510 or 810 drops would be an idiot. Top filling out this well and have not had any problems, fills a big gap and can fill up quickly and easily. Capacity is very good in my opinion and I believe that many will 5ml capacity. Using spray, you receive two rolls, a single coil and other networks are dual coil threads. I tried a mesh coil and decent work, good taste, but I like the tank coil Tf better, and also gives a good flavor and excellent vapor production, this very strong vapor. Given all a very busy spray that can be treated.
– It is compatible with the 510 or 810 drip tips
– The build quality is good
– facilitate filling system
– capacity of 5 ml
– Two glass bubbles tank
– Two coils
– The good taste
– dense vapor and steam production
– Easy to replace the coil
– Easy to adjust the airflow
smok mag mod:
Smok g priv mod 3 that feeds two 18650 and objects of this mod 1-230w formed. Mod dimensions are 54 mm x 28 mm x 85 mm. mod construction quality is very good and there were no complaints. I really like the design of a mod, modern look very nice in my opinion, and you can buy this mod in 4 different colors. Mod has no sharp edges and mod is very convenient to use. You can also see some details about the mod, mod at the front, you can see the “Smok” and behind the mod, you can see “G-3 PRIV” with a little information.
On the upper side of the mod, you can see the connection thread here is good and I have no problem, silver and gold spring pins. This mod, can be used up to 25 mm diameter without false atomizers.
On the rear side of the mod, you can see the battery cover and, as said this device is powered by two batteries 18650. The remains of the battery cover in place because the magnet and remains well in instead there is nothing to play which is very good. At the bottom of the deck, you can see a small slot so you can pull nails. If the battery cover is removed, you can see the orientation of the battery inside painted and we also have here the band so you can make the easiest battery. When the battery is put into the mod and mod when no very good sizzle stirring.
Sub mod can see the ventilation holes and USB port c.
You can use the USB port for software updates and can be used to recharge the batteries for this auxiliary device load balanced. As always, I recommend charging your batteries in an external charger.
On one side of the mod, you can see the shutter button. shutter button on the device is really big and dislocation, it works very well. I like the shutter button and in my opinion is very comfortable to use. Above the shutter button, you can see another button is used to turn on / off the screen and lock / unlock the screen.
On the front you can see the mod touch screen that really, really big screen, the screen size is 2.4inch. I think this is a beautiful screen and the screen brightness is good.
To activate it you must click 5 times the shutter button and should do the same to turn it off. When the power supply mode is activated will appear on the screen:
– I can not
– locking / unlocking
– The battery indicator
– Time puff
– Left and right
– coil resistance
– against blow
Thus, on the screen, we have all the necessary information and this is a big high definition screen with good brightness, because you can see everything that is good on the screen. The touch screen works very well and have not had any problems so far.
In the enter the menu, you can see:
– My style
When a mode is selected in which you can see:
Preheat: soft, standards, strong, max
Ingredients: o, ti, ss
If you choose me mode, you can set 4 different operating modes, you can select a rule, preheating of the liquid and can be written using and NIC.
Choosing puff puff, you can reset the counter and can set the maximum drag.
If you choose the settings you can see:
– General (approximately factory reset, accessibility, food)
– Chip (Info)
– Theme (you can choose the timeout color and screen)
– Access code
How do these devices work and my thoughts:
G 3 PRIV is my opinion that another mod is very nice with smok trinity alpha. mod build quality is very good and everything is as it should be, feels very solid in the hand model. Mod has no sharp edges and convenient to use in my opinion. I like the shutter button and in my opinion the shutter button is very convenient to use, runs smoothly for now. This mod, can be used up to 25 mm diameter without false atomizers. This mod is a fingerprint magnet will be a disadvantage for some people. Mod USB port and supports c balances the charge that many would like, but as always, I recommend using an external charger. The screen here is very good, is the size of the display of 2.4-inch touch screen and works very well, I have not had any problems so far. The screen brightness is also very nice and the screen, we have a lot of information. We also have some interesting options here, we have an access code and can choose the color on the screen.
Above the shutter button, there is a button that is used to lock / unlock the screen and enable / disable screen. The battery cover is still perfectly in place and there was no play here, which is very good.
Mod now fine and had no problems with this mod.
I really like this mod and mod works mostly without any problems so far, so I can recommend this mod if you want to buy a mod touch screen.
– fingerprint magnet
– The quality of good building mod
– I like mod design
– comfortable to use
– button located above the shutter button
– I like the shutter button
– touch screen HD 2.4 inch
– Good display brightness
– Lots of information on the screen
– Easy to use
– Touch screen works well
– You can change the colors on the screen
– balanced load
– Battey cover keeps perfectly in place
– My selection method
– Access code
– No ring
– tape so you can easily remove the battery more
Thanks health cabin
You can buy the here: smok vape